Technical Appendix
SINUMERIK 802S base line
6-15
Start-Up
36400 CONTOUR_TOL
mm,
deg.
Contour monitoring tolerance band NEW CONF
_always 1.0 *** *** DOUBLE 2/2
36500 ENC_CHANGE_TOL
mm, deg Portion of distance for backlash working NEW CONF
_always 0,1 0.0 plus DOUBLE 2/7
36610 AX_EMERGENCY_STOP_TIME
s Duration of the deceleration ramp for error states NEW CONF
_always 0.05 0.0 plus DOUBLE 2/7
36620 SERVO_DISABLE_DELAY_TIME
s Cutout delay servo enable NEW CONF
_always 0.1 0.0 plus DOUBLE 2/7
36700 DRIFT_ENABLE
– Automatic drift compensation NEW CONF
_always 0 *** ***
BOOLEAN
2/7
36710 DRIFT_LIMIT
% Drift limit value for automatic drift compensation NEW CONF
_always 1.000 0.0 plus DOUBLE 2/7
36720 DRIFT_VALUE
% Drift basic value NEW CONF
_always 0.0 DOUBLE 2/7
38000 MM_ENC_COMP_MAX_POINTS
– Number of intermediate points for interpolatory
compensation (SRAM)
POWER ON
_always 0, 0 0 5000 DWORD 2/7
To Next Page
Loading...
