Siemens SINUMERIK 808D Commissioning Manual

Commissioning Manual
01/2017
283
5.
Paste the user cycle alarm file with this softkey.
6.
Press this softkey when a message appears prompting you to restart the HMI. The new
data
will be active after the HMI restarts successfully.
Transferring the cov.com file and sc.com file
+
1.
Select the system data operating area.
2.
Open the USB storage directory through th
e following softkey operations:
→
3.
Select the cov.com and sc.com fi
les and then press this softkey to copy the files.
Note that you can use the following key to select multiple files:
4.
Press this softkey to open the window of system data.
5.
Find the folder for storing the user cycle files through the following operations, and press
this key to open it:
→ →
6.
Press this softkey to replace the following empty files:
7.
Press this softkey when a message appears prompting you to restart the HMI. The new
data will be active after the HMI restarts successfully.
Transferring the extended user text file
+
1.
Select the system data operating area.
2.
Open the USB storage directory through the following softkey o
perations:
→
3.
Locate the extended user text file (for example, almc_eng.txt) and press this sof
t
key to copy
the file.

Siemens SINUMERIK 808D Specifications

General

Brand	Siemens
Model	SINUMERIK 808D
Category	Control Unit
Language	English