09.91 1 General Notes
1.1 Product
1 General Notes
1.1 Product
The SINUMERIK 810T is a microprocessor-controlled CNC continuous-path control system for
compact machine tools
SINUMERIK 810T with integrated machine control panel
((Foto : Nr. 87 E 3834
mittig 1:1 einmontieren))
• The SINUMERIK 810T
is used primarily to control turning machines
• Programming can be either computer-aided or manual
• Operation:
– Softkeys for selecting different softkey functions
– 9” graphics screen
– Address/numerical keyboard and function keys
• Screen displays provide information in plain text, e. g. covering:
– current NC operating modes
– setpoint/actual values
– NC and PLC alarms.
• Graphics displays aid the programmer when entering programs at the machine
• ”Blueprint programming” is available for higher-speed programming of complex contour
elements
• Entered programs may be simulated graphically
• The SINUMERIK 810T
can process 9999 main programs and 9999 subroutines
200 main programs and subroutines can be stored simultaneously in the memory
• Lengthy part programs can be executed using the optional ”BLOCK TRANSFER” function.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 1-1
SINUMERIK 810T, GA3 (BN)
To Next Page