Siemens Sinumerik 810T - Page 248

4 Monitoring Functions 11.90
4.6 Listing of the alarms/alarm description
Alarm No.
Alarm Text:
4
”Incorrect unit system”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
5
”Too many input buffer parameters”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
7
”EPROM error”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
8
”Wrong axis/spindle assignment”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
9
”Memory too small for UMS”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
10
”UMS Error”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
11
”Wrong UMS identifier”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
12
”PP memory wrongly formatted”
Remarks: Alarm only on commissioning
Alarm No.
Alarm Text:
13
”RAM error CPU”
Remarks: Alarm only on commissioning
4-6
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)