5 Measuring Cycles for Milling Machines and Machining Centres 07.90
5.2.7 L977 ZO determination in slot (paraxial)
Example: ZO determination in slot with measuring cycle L977
(Data as in Fig. 5.15)
%MPF 9778
N5 G54 T200 T number probe; select ZO
N10 G00 X150 Y130 Position probe in Y axis at
slot centre point and
in X axis at measuring position
N15 Z40 D99 Position Z axis in slot
N20 R10=1 R22=1 R23=31 R25=0 Define parameters for measuring cycle
R27=1 R28=1 R30=2 R32=100
R36=1
N25 L977 Cycle call for ZO determination in Y
N30 G00 Z160 Withdraw Z axis from slot
:
Machining program
:
:
N... M30
5–38 © Siemens AG 1990 All Rights Reserved 6FC5197- AB70
SINUMERIK 840/850/880 (BN)
To Next Page
Loading...
Need help?
General
