Siemens SINUMERIK 840D pl - Page 27

Procedure
1. The "Settings" window is open.
Press the "URLs>" softkey.
2. Press the "Edit" softkey and select the following settings:
– Directory: Select the "User" entry in the "Directory" drop-down list.
– Display home page: Select the "Overwrite here" check box.
– RenderService: Select the "Overwrite here" check box.
– URL web service: Select the "Overwrite here" check box.
– Enter the following WebService URL, for example, for the MindSphere V3 Livesystem:
https://gateway.eu1.mindsphere.io/api/agentcom-mmmops/v3/ws11
– Enter the required value in the "Transmit timeout ms" text box (default value is 200). For
MindSphere, a value of "20" is recommended, and select the "Overwrite here" check box.
– Enter the required value in the "Timeout on receive in ms" text box (default value is 200).
For MindSphere, a value of "20" is recommended, and select the "Overwrite here" check
box.
3. Press "OK".
A syntax check is performed and the access data is saved.
4. To establish a connection from the customer network, you must adapt the proxy settings.
– Press the "Proxys>" softkey.
The stored settings are displayed.
Installation/configuration
4.2 SINUMERIK control with SINUMERIK Operate - Setting the proxy
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB 27