Siemens SINUMERIK 840D sl TCU 30.3 - Service and Diagnostics

Example:
[Station]
maxhostindex=2 /* Number of nodes that are defined under
[host_1] and [host_2].
mcpIndex=192
tcuIndex=1
eksIndex=0
[host_1]
Address=192.168.214.1 /* Address of the NCU to which the
connection is established during booting.
[host_2]
Address=157.163.230.202 /* Address of the PC
password=123456 /* Password of the VNC server on the PC
Switching over between the nodes
With the menu back key + MENU SELECT, the following actions are triggered:
● In the header of the displayed window you will see the TCU name, for example TCU1.
● A selection list for connecting to the other nodes will be displayed on the TCU.
5.4 Service and diagnostics
5.4.1 Using the TCU's main menu
"Main menu"
The "Main menu (TCU1)" dialog is started with the menu back key and the <MENU SELECT>
key:
Networking
5.4 Service and diagnostics
TCU 30.3
Manual, 09/2017, A5E40874197 51