Siemens SINUMERIK 840D sl User Manual

Procedure
1. Select the "Program" operating area.
2. Press the "Edit" softkey.
3. Press the ">>" and "Settings" softkeys.
The "Settings" window opens.
4. Make the required changes.
5. Press the "Delete mach. times" softkey if you wish to delete the machining
times.
The machining times that have been determined are deleted from the
editor as well as from the actual block display. If the machining times are
saved to an ini file, then this file is also deleted.
6. Press the "OK" softkey to confirm the settings.
See also
Replacing program text (Page 216)
Machining the workpiece
6.10 Editing a program
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 225

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based