Siemens SINUMERIK 840D sl User Manual

3. Press the <SELECT> key.
The "Network Title / Comment" window opens and shows the title and a
possibly assigned comment for the selected network.
5. Press the "Change" softkey.
The fields can be edited.
Note:
To insert a line break in comment, use the key combination <ALT> +
<INPUT>.
6. Enter the changes and press the "OK" softkey to transfer the data to the
user program.
23.5.9 Displaying the network symbol information table
All of the symbolic identifiers used in the selected network are displayed in the "Network
Symbol Information Table" window.
The following information is listed:
● Names
● Absolute addresses
● Comments
The symbol information table remains empty for networks that do not contain any global
symbols.
Procedure
1. The ladder diagram display (LAD) is open.
2. Select the desired network and press the "Symbol info" softkey.
The "Network Symbol Information Table" window appears.
3. Use the cursor keys to move within the table.
Edit PLC user program (828D only)
23.5 View of the program blocks
Milling
920 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based