Siemens SINUMERIK 840D sl User Manual

Procedure
1. Select the "Machine" operating area.
2. Press the <AUTO> key.
3. Press the "Times, Counter" softkey.
The "Times, Counter" window opens.
4. Select "Yes" under "Count workpieces" if you want to count completed
workpieces.
5. Enter the number of workpieces needed in the "Desired workpieces" field.
The number of workpieces already finished is displayed in "Actual work‐
pieces". You can correct this value when required.
After the defined number of workpieces is reached, the current workpie‐
ces display is automatically reset to zero.
See also
Specifying the number of workpieces (Page 341)
Machining the workpiece
6.16 Displaying the program runtime and counting workpieces
Milling
266 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based