Siemens SINUMERIK 840D sl User Manual

7. Continue programming up to the point where you want to repeat the pro‐
gram blocks.
8. Press the "Various" and "Repeat progr." softkeys.
9. Enter the names of the start and end markers and the number of times
the blocks are to be repeated.
10. Press the "Accept" softkey.
The marked program blocks are repeated.
Creating a ShopMill program
9.11 Repeating program blocks
Milling
340 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based