Diagnostics
6
6.1 Overview
Overview
The OPC UA server offers a variety of diagnostics information, as described in the OPC UA
Standard Part 5 - "Information Modell", Chapter 6.
This diagnostics information can be found under the Server Node:
Figure 6-1 Diagnostics Information - Server Node
6.2 Diagnostics screen
Requirement
Note
To show the correct status of OPC UA server you must have at least one type of message
encryption (128 bit or 256 bit) enabled.
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 04/2018, 6FC5397-1DP41-0BA0 61
To Next Page
Loading...
