07.90 5 Measuring Cycles for Milling Machines and Machining Centres
5.2.6 L977 ZO determination on shaft
Example: ZO determination on shaft with measuring cycle L977
(Data as in Fig. 5.14)
%MPF 9777
N5 G54 T200 T number probe; select ZO
N10 G00 X180 Y130 Position probe in X and Y axes
at shaft centre point
N15 Z101 D99 Position Z axis above shaft
N20 R10=1 R19=-30 R22=1 R23=22 Define parameters for measuring cycle
R25=0 R27= 1 R28=1 R32=130
R36=1
N25 L977 Cycle call for ZO determination in X/Y
N30 G00 Z160 Run up Z axis
:
Machining program
:
:
N... M30
© Siemens AG 1990 All Rights Reserved 6FC5197- AB70 5–35
SINUMERIK 840/850/880 (BN)
To Next Page
Loading...
