SINUMERIK
®
documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in ”Remarks” column:
A . . . New documentation
B . . . Unrevised reprint with new Order No.
C . . . Revised edition with new status.
If factual changes have been made on a page since the last edition, this is indicated by a
new edition coding in the header on that page.
Edition Order No. Remarks
07.90 6ZB5 410-0EX02-0BA0 A
10.91 6ZB5 410-0EX02-0BA1 C
01.93 6FC5 197-0AB70-0BP0 C
08.96 6FC5 197-0AB70-0BP1 C
Siemens quality for software and training
to DIN ISO 9001, Reg. No. 2160-01
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
This publication was produced on the Siemens 5800 Office
System.
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
design, are reserved.
We have checked that the contents of this publication agree with the hardware and
software described herein. The information given in this publication is reviewed at
regular intervals and any corrections that might be necessary are made in the
subsequent printings. Suggestions for improvement are welcome at all times.
Subject to change without prior notice.
© Siemens AG 1992, 1993, 1994, 1995, 1996 All Rights Reserved
Order No. 6FC5 197-0AB70-0BP1
Printed in the Federal Republic of Germany
To Next Page
Loading...
Need help?
General
