5 Measuring Cycles for Milling Machines and Machining Centres 07.90
5.3.2 L979 Measure shaft (at random angles)
Example: Measure shaft with measuring cycle L979
(Data as in Fig. 5.19)
%MPF 9792
:
Machining centre program
:
N500 G54 T200 T number probe; select ZO
N505 G00 X255 Y130 Position probe in X and
Y axes near P1
N510 Z20 D99 Position Z axis level with P1
N515 R10=2030 R11=10 R13=0 R20= 180 R21=130 Parameter für Meßzyklus definieren
R22=1 R23=2 R24= 10 R25=0
R26=90R27=1 R28= 1 R29=3
R31=1000 R33=0.002 R34= 0.03 R36=1
R37=0.06 R40=0.03 R41=-0.03 R42=130
N525 L979 Cycle call for shaft measurement
in X/Y
N530 G00 Z160 Run up Z axis
N535 M30
5–50 © Siemens AG 1990 All Rights Reserved 6FC5197- AB70
SINUMERIK 840/850/880 (BN)
To Next Page
Loading...
Need help?
General
