07.90 5 Measuring Cycles for Milling Machines and Machining Centres
5.3.3 L979 Measure slot (at random angles)
Example: Measure slot with measuring cycle L979
(Data as in Fig. 5.20)
%MPF 9793
:
Machining centre program
:
N500 G54 T200 T number probe; select ZO
N505 G00 X150 Y170 Position probe in X and
Y axes near P1
N510 Z40 D99 Position Z axis level with P1
N515 R10=2030 R11= 10 R20=150 R21=130 Define parameters for measuring cycle
R22=1 R23= 11 R24=70 R25=0
R27=1 R28= 1 R29=3
R33=0.002 R34= 0.03 R36=1 R37=0.06
R40=0.03 R41=-0.03 R42=100
N525 L97
9 Cycle call for slot measurement
in X/Y
N530 G00 Z160 Run up Z axis
N535 M30
© Siemens AG 1990 All Rights Reserved 6FC5197- AB70 5–53
SINUMERIK 840/850/880 (BN)
To Next Page
Loading...
