3.3 Memory card interface
3.3.1 SD card system
Overview
PPU1740 has an SD card interface provided on the backside of the panel. It is necessary to run
the PPU.
SD card with system software
The SD card is not supplied along with the PPU. It must be ordered as a separate component.
NOTICE
Inserting or withdrawing with the power connected can destroy the SD card
The SD card may be inserted or removed only when the system is de-energized.
Data
The SD card is required for the operating system (SINUMERIK system software) of the PPU
and license key, when ordered.
The SINUMERIK system software is delivered on the SD card.
The SD card also contains:
● User data (folders like /user and /oem are available)
● Version info (serial number, version, type designation)
● License key
● OEM data (manufacturer settings).
This means that the SD card can be inserted into another PPU without having to change the
licenses.
System characteristics
3.3 Memory card interface
PPU 1740
Equipment Manual, 01/2019, A5E47615272B AA 37
To Next Page
Loading...
