Connectable components
8
8.1 NX10.3 / NX15.3
8.1.1 Description
Properties
Using the NX10.3 and NX15.3 modules, you can expand the performance of an axis group of
a SINUMERIK ONE CNC automation system. Each NX10.3 can control up to 3 additional axes
and each NX15.3 can control up to 6 additional axes.
Type plate
The NX module type plate contains the following information:
&RPSRQHQWQDPH
2UGHUQXPEHU
,'QXPEHU
+:YHUVLRQ
6HULDOQXPEHU
Figure 8-1 Type plate using the NX10.3 as example
Note
You might need to access the information provided on the side-mounted type plate after the
equipment has been mounted. Since the type plate is located on the right-hand side of the
housing, which is the side typically used to connect to the SINAMICS S120 module, we
recommend that you make a note of the NX module serial number prior to assembly.
PPU 1740
Equipment Manual, 01/2019, A5E47615272B AA 83
To Next Page
Loading...
