Siemens SINUMERIK ONE PPU 1740-1900 - Page 64

Connection options
The following overview shows the interfaces and their connection options:
System network
Digital I
Digital I/O
DRIVE-CLiQ
Electronic handwheel
(up to 2)
USB storage medium
USB storage medium
Ethernet cable
Programming device, PC
Remote diagnostics router
DRIVE-CLiQ cable
≤ 70 m
Power supply
Article number
Prefabricated cable
Drive:
12 digital inputs
8 digital inputs/outputs
CNC:
8 digital inputs
8 digital outputs
Analog spindle (X252)
PN controllers and
devices
Factory network
Ethernet cable
24 VDC
Ethernet PPU
rear
Ethernet PPU
rear
PLC I/O
6SL3060-4A..0-0AA0 (in fixed lengths)
6FX2002-1DC00-1..0 (by the meter)
≤ 100 m
6FX8002-2BB01-1A..
≤ 3 m
USB cable
≤ 3 m
USB cables
≤ 3 m
Handwheels
USB PPU rear
USB PPU rear
NX10.3/NX15.3
SINAMICS S120
SINUMERIK
MCP interface PN
SIMATIC PROFINET IO
150P1
150P2
SINAMICS PN Drives
SD card
PPU rear
Ethernet cable
X1
X127
X130
X120
X143
X160
X125
X135, X145
X100
X101
X102
X103
X122
X132
X242
X252
SINUMERIK ONE
PPU 1740
≤ 100 m
Ethernet cable
≤ 100 m
≤ 100 m
≤ 10 m
≤ 30 m
≤ 100 m
Figure 7-1 Interface connections
Interface description
7.1 Interface overview
PPU 1740
64 Equipment Manual, 01/2019, A5E47615272B AA