Siemens SIPART DR19 User Manual

SIPART DR19
64 C73000-B7474-C140-06
Configuring Quick Reference
S42 Control signal CB
[0]
1
2
Static, no acknowledgement
Static with acknowledgement
Dynamic as pulse (flip-flop-effect)
S43 Blocking of internal/external setpoint switchover
[0]
1
2
Internal only
External only
No blocking
S44 x-tracking with H or N or Si
[0]
1
No
Yes
S45 Setpoint following CB-failure
[0]
1
Last wi
Safety setpoint SH1
S46 Tracking of wi or SH1/SH2/SH3/SH4 to actual setpoint w
wi SH1 to SH4
[0]
1
2
yes no
no no
yes yes if S1 = 1
S47 Direction of action in relation to xd (w-x)
[0]
1
Normal (Kp>0)
Reversed (Kp<0)
S48 Connection of D element
[0]
1
2
3
4
xd
x
x1
z direction of action against x (conn. to manipipulated variable y)
z direction of action with x (conn.to manipulated variable y)
S49 Choice of adaptation
[0]
1
2
No adaptation
Control response without overshoot
Control response with overshoot based on absolute value optim.
Config.
switch
Setting Function
DIGITAL INPUTS
SETPOINT SWITCHOVER
CONTROL ALGORITHM

Siemens SIPART DR19 Specifications

General

Brand	Siemens
Model	SIPART DR19
Category	Controller
Language	English