Assembly and Installation Information
SIPART DR22/DR24
C79000-M7474-C38-01
13
Contents
Seite
1 General Information 13....................................
2 Safety Information 14.....................................
3 Scope of Supply 14.......................................
4 Important Technical Data 15...............................
5 Before Installation 16......................................
5.1 Switching mains voltage 230 VX/115 VX 16....................
5.2 Switching AE1 to AE3 17...................................
5.3 Labelling the Front Mask 17.................................
5.4 Insertion of Modules 18.....................................
6 Mechanical Installation 19.................................
7 Electrical Connection 20...................................
7.1 Wiring the basic device 20..................................
7.2 Device Response after Switching on the Power Supply 22.......
7.3 Wiring the Signal Converter 22...............................
7.4 Connect Device to the Supply Voltage 23......................
1 General Information
The assembly and installation information will enable you to perform the set-up
and the electrical connections on the basic device.
Further information about parameterization and structuring as well as the wiring of
the signal converter can be found in the handbooks for the SIPART DR22 and
SIPART DR24.
The manuals can be ordered from a Siemens office with the following order
numbers:
SIPART DR22 SIPART DR24
englisch
deutsch
C79000-G7476-C154
C79000-G7400-C154
englisch
deutsch
C79000-G7476-C153
C79000-G7400-C153
To Next Page
Loading...
Need help?
General
