Assembly and Installation Information
SIPART DR22/DR24
C79000-M7474-C38-01
14
2 Safety Information
!
W ARNING
The comments and warnings given in these instructions contain
important information on the productand mustbe strictly observed
for safe operation.
The device may not be connected if it s hows signs of external damage.
When the device is operating electrical equipment, certain parts of the device are
unavoidably under dangerous voltage. Non-observance of the warnings can result
in serious injury or damage to equipment. Therefore only qualified personal
should work with this device.
3 Scope of Supply
The following items are supplied:
- 1 controller corresponding to the order
- 1 power supply connector 230 V/115 V or one special connector for auxiliary
power UC 24 V
- 2 clamping elements, pluggable
- 1 assembly and installation information
- multi-pin screw-type terminal blocks for process signals
Basic device:
Order number Power supply
6DR2210-4
6DR2210-5
6DR2410-4
6DR2410-5
UC 24 V
AC 230 V/115 V switchable
UC 24 V
AC 230 V/115 V switchable
Signal converter:
Signal converters have separate order and delivery details. For processing
reasons, it is possible that basic devices and signal converters that have been
ordered together will be delivered separately.
To Next Page
Loading...
Need help?
General
