Siemens SIPART PS100 - 3 Safety Notes; Prerequisites for Safe Use; Warning Symbols on the Device; Laws and Directives

Safety notes
3
3.1 Prerequisites for safe use
This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the speci󹪝cations relevant
to safety.
Observe the information and symbols on the device. Do not remove any information or symbols
from the device. Always keep the information and symbols in a completely legible state.
3.1.1 Warning symbols on the device
Symbol Explanation
Consult operating instructions
3.1.2 Laws and directives
Observe the test certi󹪝cation, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
• IEC 60079-14 (international)
• EN 60079-14 (EU)
• For Korea only:
$







SIPART PS100
Compact Operating Instructions, 05/2021, A5E50188940-AA 11