Siemens SIPART PS100 - QUICK START [01]

Digital output (DO), terminals 31 and 32
Maximum supply voltage U
H
35 V
"Conductive" state
• Permissible rated current 50 mA
• Maximum terminal voltage 3 V
• Overload-proof
"Locked" state
"Locked" is also the status if the device is faulty or analog input
(AI) is = 0 mA.
I < 60 µA
9.3 Rated conditions
Operating conditions
Ambient conditions for operation according to IEC 60068-2 For use indoors and outdoors.
• Ambient temperature
-20 ... +80 °C (-4 ... +176 °F)
• Relative humidity
0 ... 100%
Pollution degree according to IEC 61010-1 2
Overvoltage category according to IEC 61010-1 II
Enclosure degree of protection
• In accordance with IEC 60529
IP66
• In accordance with NEMA 250
Type 4X
Corrosion protection according to EN ISO 9227:2012 and
EN ISO 12944:1999
• 6DR710 polycarbonate enclosure
C5‑M medium durability
• 6DR711 aluminum enclosure
C5‑M medium durability
Vibration resistance
• Harmonic oscillations (sine) according to
IEC 60068-2-6
3.5 mm (0.14"), 2 ... 27 Hz, 3 cycles/axle
98.1 m/s² (321.84 ft/s²), 27 ... 300 Hz, 3 cycles/axle
• Bump (half-sine) according to
IEC 60068-2-27
150 m/s² (492 ft/s²), 6 ms, 1000 shocks/axle
• Noise (controlled digitally) according to
IEC 60068-2-64
10 ... 200 Hz; 1 (m/s²)²/Hz (3.28 (ft/s²)²/Hz)
200 ... 500 Hz; 0.3 (m/s²)²/Hz (0.98 (ft/s²)²/Hz)
4 hours/axle
9.4 Pneumatic data
Pneumatic data
Pneumatic operating medium Compressed air, carbon dioxide (CO
2
), nitrogen (N
2
), noble
gases
• Operating pressure
1.4 ... 7 bar (20.3 ... 101.5 psi)
Technical speci󹪝cations
9.4 Pneumatic data
SIPART PS100
44 Compact Operating Instructions, 05/2021, A5E50188940-AA