Siemens SIPART PS100 - Design of the Nameplate

3. Retain damaged parts for clari󹪝cation.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
2.6 Design of the nameplate
Example of manufacturer nameplate
F
FieldB2
F
-
-
PROCESS CONTROL
EQUIPMENT
Made in France / ἲᅜไ㐀
Siemens AG, DE-76181 Karlsruhe
www.siemens.com/sipartps100
6DR7112 -3NN00 -0AA0
SIPART PS100
<FW: X.XX.XX>
FieldB8
IP66 / NEMA Type 4X <HW: X.XX.XX>
p = 1.4 … 7 bar
FieldB5
S/N: N1A9997300001
AI=4…20mA
R-R-S49
SIPART
PS100
-Z A20;Y15












① Manufacturer ⑦ Country of origin
② Note operating instructions, certi󹪝cates and ap‐
provals under Product documentation
(Page 51)
⑧ Supply pressure PZ
③ Conformity with country-speci󹪝c directives ⑨ Degree of protection
④ Serial number ⑩ Ordering supplement (Order code)
⑤ QR code to the mobile website with device-spe‐
ci󹪝c product information
⑪ Article number
⑥ Firmware version and hardware version ⑫ Product name
Introduction
2.6 Design of the nameplate
SIPART PS100
8 Compact Operating Instructions, 05/2021, A5E50188940-AA