1. Mount the positioner.
Mounting to linear actuator (Page 17)
Mounting to part-turn actuator (Page 20)
2. Connect the positioner.
Electrical connection (Page 29)
Pneumatic connection (Page 29)
3. Ground the positioner.
Grounding (Page 29)
4. Remove the enclosure cover.
5. Commission the positioner.
Initialize in "NO INIT" operating mode (Page 35)
Local operation (Page 37)
6. Remove the enclosure cover.
Getting started
SIPART PS100
6 Compact Operating Instructions, 05/2021, A5E50188940-AA
To Next Page
Loading...
