Accessories
10.2 Terminal support for stand-alone assembly
SIRIUS Innovations - SIRIUS 3RU2 thermal overload relays / SIRIUS 3RB3 solid-state overload relays
88 Manual, 09/2014, A5E03656507420A/RS-AA/002
The figure below shows how the terminal support for stand-alone assembly is removed,
based on the example of a 3RU2136 thermal overload relay (size S2).
Table 10- 6 Removing the terminal support (screw-type connection system) size S2
1 Release the terminal support by
pushing down the clip on the underside
of the terminal support using a
screwdriver.
2 Remove the terminal support with the
mounted overload relay from the
mounting rail with a swivel movement
to the front.
To Next Page
Loading...
