Accessories
10.3 Mechanical remote RESET
SIRIUS Innovations - SIRIUS 3RU2 thermal overload relays / SIRIUS 3RB3 solid-state overload relays
Manual, 09/2014, A5E03656507420A/RS-AA/002
91
The figure below shows how the release slide, the holder, the former, and the pushbutton
are mounted based on the example of a size S00 3RU21 thermal overload relay:
Before the release slide can be mounted, the release slide and the optional extension
plunger have to be shortened to the required length.
Table 10- 7 Mounting the release slide
1 Attach the hook on the release slide to the
designated opening on the overload relay.
2 Fold the module up so that the locking latch
snaps into the overload relay.
3 Attach the former to the release slide.
4 Fit the pushbutton (3SB3000-0EA11) in the
front cover.
5 (Optional) Attach the pushbutton to the
extension plunger (3SX1335).
To Next Page
Loading...
