Configuration
31
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.6.6 Audio Setup Screen
Highlight Audio in the Main menu and press the
button. The Audio Setup
screen appears.
Fig. 42 Audio Setup screen.
Highlight the box beside Audio Recording and press the button. This toggles
between On and Off. When it is On, the DVR also records audio when it is
recording video.
Highlight the box beside Mute and press the button. This toggles between On
and Off. When it is On, the DVR will NOT play live or recorded audio.
The DVR supports 4 Audio inputs. You can set up each input on the Audio Setup
screen. When it is On, the DVR will play live audio through the attached speaker
when it displays live video. Move to the Audio In field, and highlight the box under
On/Off heading, and press the button. This toggles between On and Off.
You can save your changes by highlighting OK and pressing the
button
.
Selecting Cancel exits the screen without saving the changes.
NOTE:
The DVR will NOT record audio when the recording speed is set to less 15 ips (12.5 ips for PAL). The
DVR may not record audio depending on the Transfer Speed when the RAS (Remote Administration
System) Watch application program is connected.
To Next Page
Loading...
