Siemens SISTORE AX4 - Page 32

Configuration
32
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.6.7 RS232/RS485 Setup Screen
The RS232/RS485 setup screen allows you to set up the RS-232C and RS-485
ports to communicate with external devices such as remote controls and dome
cameras.
Fig. 43 RS232/RS485 setup screen.
Highlight the field for the settings you wish to make. Select the correct Baud Rate,
Parity, Data Bit and Stop Bit for the device you are connecting to the DVR.
For RS232, it is possible to select Remote Control, External Modem or Text-In in
the Usage field. For RS485, it is possible to select either Remote Control or PTZ
Control in the Usage field.
NOTE:
Selecting the External Modem in the RS232 field only defines the RS-232C port as being used for
external modem connections. Refer to Modem Setup screen for details of setting up an external
modem.
NOTE:
Selecting the PTZ Control in the RS485 field only defines the RS-485 port as being used for PTZ
camera connections. Select the PTZ device in the Camera Setup screen.