Siemens SISTORE AX4 - Page 49

Configuration
49
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.10.2 Modem Setup
Fig. 64 Modem Setup screen.
Highlight the box beside Use and press the button. This toggles between
Internal Modem and External Modem.
NOTE:
An Internal Modem is an option.
Highlight the box beside Baud Rate and press the button. A list of baud rates
ranging from 300 to 115,200 appears.
Highlight the box beside Data Bit and press the button. This toggles between 7
bit and 8 bit formats.
Highlight the box beside Stop Bit and press the button. This toggles between 1
and 2 Stop Bits.
Highlight the box beside Parity and press the button. A drop-down list appears.
You can select from None, Odd or Even parity.
You can save your changes by highlighting OK and pressing the
button
.
Selecting Cancel exits the screen without saving the changes.
NOTE:
An internal modem may have compatibility problem with the modem used for the RAS (Remote
Administration System). Please contact y our dealer/installer for available models for the RAS.