Siemens SISTORE AX4 - Page 50

Configuration
50
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.10.3 Callback Center (LAN) Setup Screen
Fig. 65 Callback Center (LAN) Setup screen.
The DVR can be set up to contact a computer running RAS (Remote
Administration System) or send an e-mail on a LAN when an event occurs.
Highlight the box beside IP Address and enter the IP address of the computer you
want contacted during an event.
Highlight the box beside Retry and enter the number of times you would like the
DVR to try contacting the computer. You can select from 1 to 10 retries.
Highlight the box beside E-mail notification and press the button to toggle
between On and Off.
Highlight the box beside SMTP Server IP and enter the SMTP server IP address,
obtained from your system administrator.
Highlight the box beside E-mail recipient and enter the recipient’s e-mail address.
Use the virtual keyboard to enter the e-mail address.
Highlight the box beside E-mail sender and enter the sender’s e-mail address.
NOTE:
The e-mail address must include the character “@” to be a valid address.