Siemens SITOP PSU8200 24 V/20 A - Description, device design, dimension drawing; Device description

SITOP PSU8200/3800 3ph
Manual, 05.2018, C98130-A7638-A1-6-7629
11
Description, device design, dimension drawing
2
2.1
Device description
SITOP PSU8200/3800 3ph is a primary-clocked power supply for connection to a 3-phase
AC line supply. An electronically regulated DC voltage that can be set via a potentiometer is
available at the output of the device. The output of the device is isolated, no-load proof and
short-circuit proof. The LED displays indicate the operating state. The operating state of the
device can be processed via the signaling contact. Remote control and remote reset are
possible via the remote ON/OFF.
①
AC input
②
DC output
③
Potentiometer (output voltage)
④
Signaling contact, remote (not for 6EP1437-3BA10)
⑤
Indicator lights (OUTPUT O.K., OVERLOAD, SHUTDOWN)
⑥
Selector switch (ON - OFF)
⑦
DIN rail slider
⑧
Convection
⑨
Clearance above/below
Figure 2-1 Design