SITOP PSU8200/3800 3ph
Manual, 05.2018, C98130-A7638-A1-6-7629
27
Mounting position, mounting clearances
Standard mounting position
The device is mounted on standard mounting rails. The device must be mounted vertically in
such a way that the input terminals and the output terminals are at the bottom to ensure
correct cooling.
A clearance of at least 40 mm or 50 mm should be maintained above and below the device
(maximum depth of the cable duct, 50 mm).
No space is required at the side.
Output current as a function of the ambient temperature and mounting height
Figure 4-1 6EP3436-8SB00-0AY0: Output current in the standard mounting position
Figure 4-2 6EP1437-3BA10: Output current in the standard mounting position
To Next Page
Loading...
