EasyManua.ls Logo

Siemens SITOP PSU8200 24 V/20 A - Overview

Siemens SITOP PSU8200 24 V/20 A
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SITOP PSU8200/3800 3ph
Manual, 05.2018, C98130-A7638-A1-6-7629
3
Overview
The 3-phase power supply from the SITOP PSU8200 product line is the powerful, regulated
technology power supply for automated machines and systems.
The 3-phase power supply from the PSU3800 product line is the power supply optimized for
charging batteries.
The key benefits of the product include:
Wide-range input, which allows it to be connected to almost any 3-phase line supply
around the world
The output voltage can be adjusted in the range 12 - 14 V/24 - 28 (28.8) V/36 - 42 V/
42 - 56 V
Power boost during operation with 300% rated current for 25 ms (only PSU8200)
Extra-Power with 1.5x rated current for 5 seconds for switching on loads with a high
inrush current (only PSU8200)
Especially low width without requiring any lateral mounting clearances
Ambient temperature -25 ... 70 °C
Selectable short-circuit response (constant current or latching shutdown)
A soft characteristic can be selected for a parallel connection (for uniform load distribution
of power supply units of the same type)
3 LEDs are used to display the operating state
Signaling contact "12 V O.K"/"24 V O.K"/"36 V O.K"/"48 V O.K"

Table of Contents

Related product manuals