Siemens SITRANS LC300 - LC300 Menu Functions; Maintenance; Unit Repair and Excluded Liability

Page EN-10 SITRANS LC300 – QUICK START MANUAL A5E32268590
mmmmm
English
LC300 Menu Functions
Use the rotary switch and the push-buttons to set the display and programming values for your
application.
Maintenance
SITRANS LC300 requires no maintenance or cleaning under normal operating conditions. Even
with significant build-up on the SITRANS LC300 probe, the level controller will continue to
operate.
Unit Repair and Excluded Liability
For detailed information, please see the inside back cover.
Rotary
Switch 
Position
0 1 2 3 4 5
Display
Read PV
(pF)
Read LRV (pF)
(0% level)
Read URV (pF)
(100% level)
Read mA loop-
current
Diagnostics Damping
Up button
Increase LRV Increase URV
Set fault protection
setting to 22 mA
Product 
Version
Increase
Damping
Down 
button
Decrease LRV Decrease URV
Set fault protection
setting to 3.6 mA
Decrease
Damping
Both 
buttons
Set LRV from PV Set URV from PV
Disable fault
protection
Reset/
Acknowledge
Fault
Set Damping
to 1.00
Note: Build-up of material on the active shield area has little or no effect on the
performance of the SITRANS LC300.