Siemens SITRANS P310 with HART - Operating Conditions

SITRANS P310 with HART
36 A5E35075329-01, 05/2015
7.3
Operating conditions
Gauge pressure rated conditions
Installation conditions
Ambient conditions
•
Ambient temperature
Note
Observe the temperature class in hazardous areas.
Measuring cell with silicone oil
filling
-40 … +85 °C (-40 … +185 °F)
Display -30 … +85 °C (-22 … +185 °F)
Storage temperature -50 … +85 °C (-58 … +185 °F)
•
Climate class
Condensation
Permitted
•
Degree of protection in
accordance with EN 60529
IP66, IP68
• Electromagnetic compatibility
Interference emission and
interference immunity
In accordance with EN 61326 and NAMUR NE 21
Process medium conditions
•
Process temperature
Measuring cell with silicone oil
filling
-40 … +100 °C (-40 … +212 °F)
With extension to Zone 0
-20 … +60 °C (-4 … +140 °F)
Rated conditions for differential pressure and flow rate
Installation conditions
•
Installation instruction
any
Ambient conditions
•
Ambient temperature
Note
Observe the temperature class in hazardous areas.
Measuring cell with silicone oil
filling
-40 … +85 °C (-40 … +185 °F)
• 3000 kPa (435 psi)
measuring cell
• -20 … +85 °C (-4 … +185 °F)
•
For flow: -20 … +85 °C (-4 … +185 °F)
Display
-30 … +85 °C (-22 … +185 °F)
Storage temperature -50 … +85 °C (-58 … +185 °F)
• Climate class
Condensation Permitted
•
Degree of protection in
accordance with EN 60529
IP66, IP68
•
Electromagnetic compatibility
Interference emission and
interference immunity
In accordance with EN 61326 and NAMUR NE 21
Process medium conditions
•
Process temperature
Measuring cell with silicone oil
filling
-40 … +100 °C (-40 … +212 °F)
•
3000 kPa (435 psi)
measuring cell
-20 … +85 °C (-4 … +185 °F)