Procedure
① Mounting holes on the enclosure ④ Fixing screws M8 or 5/16 UNF thread
② Mounting holes in the mounting bracket
(90° r
otatable)
⑤ Fixing screws
③ Washer DIN 125 - 8.4
Figure 4-8 Mounting device to the wall with mounting bracket
1. Push the enclosure ① ont
o the mounting bracket ②.
2. Secure the enclosure ① with the xing screws ④ and washers ③ onto the mounting
bracket.
3. Secure the mounting bracket to the wall.
Use suitable xing screws ⑤.
Installing/mounting
4.6 Mounting the SITRANS TF dual chamber housing
SITRANS TH100/TH100Slim/TH320/TH420/TR320/TR420/TF320/TF420
38 Compact Operating Instructions, 07/2021, A5E41865021-AE
To Next Page
Loading...
