3. Increase the protection from high-frequency radiation through shielded connecting cables.
–
Lead the shielded connecting cables through the cable glands ②.
- or -
– Connect the cable shield to the screw of the ground terminal ③.
The screw of the ground terminal is electrically connected to the external protective
conduct
or connection.
4. Connect the input terminals ④ and output terminals ⑤.
Connecting TH420 (Page 46)
Figure 5-4 HART communication resistor ⑥
(optional)
5. Insert the temperature transmitter and screw it into place.
6
. Insert the local display.
Connecting
5.8 Connecting the SITRANS TF single chamber housing
SITRANS TH100/TH100Slim/TH320/TH420/TR320/TR420/TF320/TF420
58 Compact Operating Instructions, 07/2021, A5E41865021-AE
To Next Page
Loading...
