For Powermite MT Series 2-way and 3-way globe valves
● SSD161S.05DU (fail-in-place), and SSD161S.25DU (fail-safe): Operating voltage
AC/DC 24 V, modulating control signal DC 0...10 V
● SSD131.29U (fail-safe): Operating voltage AC 24 V, 3-position (floating) control
signal
● All actuators are self-calibrating to the valve stroke
● Modulating variants have position feedback signal
● Modulating variants are DIP switch configurable for equal percentage/linear flow
characteristic, direct/reverse acting, and the fail-safe variant for fail up/fail down
● 3-position (floating) fail-safe variant is DIP switch configurable for fail up/fail down
● Direct mounting with coupling nut, no tools required
● Manual override
● Position and actuator motion indication (LED)
● Positioning force 67 lbf (300 N)
● Parallel operation of multiple actuators possible