TC65 Terminal Hardware Interface Description
Confidential / Released
s
TC65 Terminal_HD_V02.000b Page 20 of 65 2007-02-19
2.1 Technical Requirements for Using TC65 Terminal
• Computer running Windows 2000, Windows XP
• 1.8V or 3.0V SIM card
• 8 to 30 Volts power supply unit
• RS-232 cable (for high data rates ≤ 1.5m)
• UART capable of data rates up to 460800 bps. Usually this requires an appropriate serial
adapter to be installed on the computer.
• RF antenna
• Audio handset
• Customized mating connector for the IO interface connector type Micro Mate-N-LOK.
• Terminal program to control the COM port, for example Windows HyperTerminal.
• Access to a GSM/GPRS network providing support of the authentication protocol PAP,
CHAP or MS-CHAP. The GPRS settings of your service provider should be at hand.
Please contact your service provider or follow the link below to obtain all required
information.
http://www.gsmworld.com/technology/gprs/operators.shtml
To Next Page
Loading...
Need help?
General
