If hot water is required immediately after
drawing off steam, fi rst cool the appliance
appliance gives off steam into the drip tray
The steam is very hot. Only grasp the
frothing attachment by the plastic part.
Always use suffi cient milk, otherwise the
steam produced may result in sudden
● Firmly slide together the frothing
gaps between the individual components.
● Push the frothing attachment
● Dip the tube into the vessel containing the
● Set the selector on the frothing
● Place a cup or a glass under the nozzle
of the frothing attachment
alternately in the display, press the steam
once more. The milk is drawn
into the appliance, heated, and, if
(frothed milk) is selected, frothed.
● To end the process, press the steam
. The appliance will briefl y emit
The appliance will be ready to provide
steam for around minutes.
: You can use the selector on the
and the temperature by gently rotating it
(hotter) settings regulate the temperature of
You should preferably use cold milk with a
: Clean the frothing attachment
immediately after it has cooled down by
rinsing it with water. Dried residues are
See section “Care and daily cleaning”.
The steam is very hot. Only grasp the
frothing attachment by the plastic part.
Always use suffi cient milk, otherwise the
steam produced may result in sudden
With this appliance, preparing excellent
cappuccino or latte macchiato is simplicity
● Push the frothing attachment
● Dip the tube into a vessel containing milk.
● Position a large cup under the coffee
, and direct the nozzle of the
After a short time, an optimum mix of
frothed milk and coffee will automatically
: You can halt the dispensing of milk or
coffee respectively at any time by pressing
To prepare latte macchiato
● Push the frothing attachment