EasyManua.ls Logo

Siemens TK 911N2 - Fault codes

Siemens TK 911N2
108 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Fault codes
!
Danger of electric shock!
Set the ON/OFF switch
17
to
0
, as soon as one of the
fault codes
F1
through
F10
lights up.
F1, F2, F6, F7, F9
Electrical malfunction
Set the ON/OFF switch
17
to
0
, and after about 15
seconds reset to
I
once again.
F3, F4, F5, F8
Mechanical malfunction
Set ON/OFF switch
17
to
0
and proceed as follows:
A capsule may have become jammed in the vicinity of
the brewing unit.
Remove and empty the capsule container
13
.
Pull the coffee dispenser
14
and the capsule holder
15
forwards out of their seating (Fig. 8). It should be
possible to see the capsule, which may be carefully
pushed backwards, using a spoon. Once the capsule
has been removed, restart the appliance.
If the fault code is still lit, set the ON/OFF switch
17
to
0, and then back to I again after about 5 seconds (it
may be necessary to repeat this procedure).
F
10
Capsule holder
15
missing or misaligned.
Check the capsule holder
15
, and mount correctly.
If the fault message lights up again after the appliance is put back into operation,
the hotline must be contacted.
en

Table of Contents

Related product manuals