Siemens TP700 Comfort - Caterpillar Remote Mode

For more technical support, please go to our website:
www.gillardcutting.com/technical
10
REMOTE MODE
Speed is set via analogue input terminals. This signal should be 0v to 10v only as
scales linearly from 0 to the maximum speed of the machine.
0V=MinCaterpillarspeed;10V=MaxCaterpillarSpeed
Caterpillar belt speed (White Display):
Displaystheactualspeedofthecaterpillar.
Remote input signal (White Display):
Displaysthevoltageoftheexternalcontrolsignal.