For more technical support, please go to our website:
www.gillardcutting.com/technical
15
TIMER MODE
The machine will perform a cut after a designated period of time.
Time setting:
Time in milliseconds after which the machine will perform a cut.
Blade Datum:
This is the position (from 0° to 360°) that the blade will come to rest at. It has been
calibrated at the factory to rest 180° from the cut point.
Blade Speed:
This is the value of the blade speed in % of its capable maximum. It should be set
to ensure a good cut quality with enough force to cut through the desired product.
To Next Page
Loading...
