Siemens TP700 Comfort - System Buttons

For more technical support, please go to our website:
www.gillardcutting.com/technical
19
6.2 SYSTEM BUTTONS
Control Panel:
Returns to the windows control panel.
Calibrate HMI:
Re-CalibratestheHMI.Itisrecommendedthisprocessiscarriedoutevery6months.
Language:
Allows the display language of the machine to be changed.
Working times:
DisplaysthetimethePLC,Cutterandcaterpillarhavebeenrunningsincethelastmanual
reset.
PLC Hours Run:
Records the Hours run by the PLC. Press the arrows button to reset.
Belts Hours Run:
Records the Hours run by the belts. Useful to monitor between changes. Press the arrows
button to reset.
Blade Hours Run:
Records the Hours run by the blade. Useful to lifetime of the blade. Press the arrows button to
reset.