Siemens TP700 Comfort - Drive Screen

For more technical support, please go to our website:
www.gillardcutting.com/technical
17
5. DRIVE SCREEN
TheDriveScreencontainsallstatusinformationforeverydrivettedtothe
machine.
The left hand side of the screen give a status report on each drive. When a
particular drive is healthy, the status windows will be coloured green. If a drive is
suffering from a fault, this will turn to red and the error will be detailed in the output
eld.
IfanyerrorsarenotclearedbypressingtheResetDriveFaultsbutton,thenmakea
note of the error code and contact Gillard Tech (tech@gillardcutting.com or 01684
851989).
The right hand side of the screen indicates, in real time, the utilisation of each drive
and the current position of the belts.
Boom Switch: If a motorised boom is tted then it can either be used in Auto
   orManualmode.IfAutoisselected,theboomwillopeneverytime
the belts are stopped to allow for free movement of the product.