Mounting / Installing / Connecting
4.3 Assembly procedure
VersiCharge AC Wallbox IEC
26 Operating Instructions, 03/2021, A5E50366109-AA
Preparing the assembly
1. Check the requirements.
2. Carefully open the packaging.
3. Provide a base for setting the charging station down.
4. Carefully remove the charging station from the package.
5. Inspect the charging station for damage. Complaints filed after installation will not be
accepted.
6. Check the package content (Page 20)
Risk of electric shock due to exposed electrical connections and components
Before starting the installation work, check that the supply cable has been disconnected
from the mains and secured against restart.
If damage or tampering is visible (e.g. on the enclosure, socket), do not operate the
To Next Page
