Mounting / Installing / Connecting
4.3 Assembly procedure
VersiCharge AC Wallbox IEC
Operating Instructions, 03/2021, A5E50366109-AA
27
Mounting the wall bracket
1. Remove the wall bracket from the charging station.
Figure 4-1 Removing the wall bracket
2. Align the wall bracket to the mounting surface using a spirit level. Use the wall bracket to
mark the mounting holes.
Figure 4-2 Drill picture
3. Put the wall bracket to one side and drill the holes in the wall.
4. Insert the dowels in the drilled holes.
To Next Page
