Copyright © Sigicom AB 2020 28
6.6. Automatic Power Off
D10 will automatically power off after some minutes without activity, and
is inhibited if Monitoring is on.
Power off is postponed when:
• Monitoring is stopped but there is a recording on-going.
• D10 is communicating with INFRA Net.
If Monitoring is on, only the display will automatically turn off to save
power.
For manual power off, see section 6.9.9.
6.7. Power Lost
When the batteries are completely discharged, monitoring will stop and
D10 will turn off.
If power was accidentally lost while in monitoring mode (e.g. if the
batteries were improperly removed), D10/D10 Micro will restart
monitoring when charged batteries are inserted.
6.8. GUI Menu
The graphical user interface (GUI) menu is reached by pressing from
the main screen:
To Next Page
Loading...
Need help?
General
